KNIKMOPS with telescopic jib
The extending arm of the jib on the Knikmops 90 gives you a telescopic range of 60 cm and a height of lift that?s 40 cm more than you would get with the standard.
|
 |
|
KNIKMOPS with mixing bucket
The mixing bucket was developed for mixing sand and cement: the sand is scooped up, cement is added and the integral mixer in the bucket does the rest while the load is being transported.
|
 |
|
|
|
KNIKMOPS with bold on unite
The major advantages of this bolt-on unit over a conventional mixer are exceptionally low loading height and outstanding mobility. Its capacity is 0.25 cubic metres.
|
 |
|
 |
|
KNIKMOPS on excavation jobs
This small jib is especially well suited for minor excavation jobs. With its 185-centimetre-long excavating arm and its narrow loading bucket, it's perfect for digging trenches in the ground for ducts, pipes or cables.
A swivel version of the jib is also available
|
 |
|
 |
|
KNIKMOPS with trench cutter
The trench cutter is a useful accessory for anyone who has to lay cables, ducts and pipe (e.g. drainage pipes) in the ground. This cutter makes trenches up to 90 centimetres deep.
|
 |
|
|
|
KNIKMOPS with ground leveling plank
The ground levelling plank is used to rapidly level the ground surface.
|
 |
|
|
|
KNIKMOPS with sanding system
This system can be used on the ROLLMOPS as well as on the different types of KNIKMOPS.
Two rotating brushes sprayed with water pressing the sand prefectly in to the joints.
|
 |
|
|
|
KNIKMOPS with cleaning brush
The rotary cleaning brush, which is used to sweep hard surfaces clean, is one metre wide and can be oriented to the left or right. The height of the accessory can be adjusted to compensate for brush wear.
|
 |
|
|
|
KNIKMOPS with pallet works
When fitted with the 75-centimetre-long pallet forks, the Knikmops can also be used as a forklift truck. When these forks are removed, they are especially compact for transport.
|
 |
|
|
|
Hydraulique paving clamp
The same solution like in ROLLMOPS
|
 |
|
|
|
KNIKMOPS with log splitter
In addition to its mobility and compact dimensions, this log splitter attachment has plenty of ergonomic features: there is no need to lift up large blocks of wood. The log splitter can handle blocks up to 60 centimetres long
|
 |
|
|
|
KNIKMOPS with spreader bucket
The spreader bucket was primarily developed for agriculture and horticulture, to spread fertiliser, but in winter it can be used to spread salt. The capacity of the spreader bucket is 0.35 cubic metres.
|
 |
|
|
|
| KNIKMOPS and manure fork with claw
An especially useful accessory for agriculture and horticulture is the manure fork with claw, which can also be used to shift hay, straw and tree prunings. The width of the unit varies from 85 to 125 centimetres.
|
 |
|
|
|
| KNIKMOPS with post hole borer |
with the post hole borer that can be mounted on the Knikmops you can make holes for fencing posts or plants. The diameter of the augers ranges from 8 to 60 centimetres.
|
 |
|
 |
|
| KNIKMOPS with transmission shaft
The transmission shaft is necessary when force must be transfered to other tool.
|
 |
|
|
|
KNIKMOPS with rotary mover
This rotary mover attachment is 130 centimetres wide. There is a choice of side or rear outlet for the grass cuttings. A mulching kit is available as an option.
|
 |
|
|
|
| KNIKMOPS with fodder bucket
Fodder bucket for the farming sector
|
|
|
 |
|
|
|
| KNIKMOPS with earthmover and snowplow
The earthmover and snowplow has external gum protection .
|
 |
|
|
|
| OTHER ACCESSORIES FOR KNIKMOPS |
|
|
|
|
|
|
|
|
|
| 100 kg contraweight |
|
Different types of tires |
|
|
|
 |
|
 |
|
|
|
|
roof
|
|
The turf edge cutter
|
|
|
|
 |
|
 |
|
| KNIKMOPS with cabin and snowcleaner
KM 90 with cabin and snowcleaner ready for snowcleaning
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A. WHEELBASE
|
1430 mm
|
B. CHASSIS LENGTH
|
2285 mm
|
C. TOTAL LENGTH WITH SHOVEL BUCKET
|
2850 mm
|
D. ROLLBAR HEIGHT
|
2195 mm
|
E. JIB HINGE HEIGHT
|
1305 mm
|
F. SEAT HEIGHT
|
1170 mm
|
G. FRAME HEIGHT
|
1130 mm
|
H. GROUND CLEARANCE
|
225 mm
|
I. TIPPING DISTANCE, MINIMUM
|
65 mm
|
J. TIPPING ANGLE, MAXIMUM
|
22°
|
K. TIPPING-IN ANGLE FROM GROUND SURFACE
|
33°
|
L. EXCAVATION DEPTH
|
25 mm
|
M. TIPPING HEIGHT, MAXIMUM
|
1270 mm
|
N. TRANSFER HEIGHT
|
1790 mm
|
O. PALLET FORK LOADING HEIGHT, MAXIMUM
|
1830 mm
|
P. SHOVEL BUCKET ROTATION POINT, MAXIMUM
|
2000 mm
|
Q. MAXIMUM HEIGHT WITH BUCKET IN
|
2360 mm
|
R. OVERALL WIDTH
|
930/1160 mm
|
S. TURNING CIRCLE, INSIDE EDGE
|
1080 mm
|
T. TURNING CIRCLE, OUTSIDE EDGE
|
2240 mm
|
U. TURNING CIRCLE, OUTSIDE EDGE, SHOVEL BUCKET
|
2320 mm
|
X. SHOVEL BUCKET WIDTH
|
950/1245 mm
|
FUEL TANK CAPACITY
|
35 l
|
HYDRAULIC TANK CAPACITY
|
35 l
|
DIESEL ENGINE
|
Kubota D1105
|
ENGINE POWER
|
26 pk
|
CYLINDERS
|
3
|
DRIVE HYDRAULICS
|
plunger pump
|
WHEEL DRIVE
|
orbit motor
|
OUTPUT OF WORK HYDRAULICS
|
33 l
|
WEIGHT, READY-TO-DRIVE, WITHOUT ATTACHMENT
|
950 kg
|
LIFTING FORCE
|
550 kg
|
BREAKOUT FORCE
|
750 kg
|
TOP SPEED
|
16 km/h
|
|
|
|
|
|
|
|
|
|