ROLLMOPS 4X4
From the pavers for the pavers.
|
ROLLMOPS 4 X 4 with rubble / sand bucket
The combined rubble/sand bucket is the ideal bucket for pavers. The basic component is a grating bucket for loose stones and rubble. To this, a lining bucket can be fitted, using only two screws, for working with sand.
|
 
|
|
Pavers universal transport clamp
The transport clamp lets the paving contractor put large numbers of paving blocks where he wants them. The standard clamp has a lifting capacity of 500 kilos and a clamp width of 78 to 112 centimetres. Several attachments are available for various kinds of block.
|
 |
|
 |
|
Sandbush on ROLLMOPS 4 X 4
The sand brush, which can be fitted to the clamp, is used to brush sand between the blocks. The sand brush covers a width of one metre.
|
 |
|
|
|
Rotary cleaning brush
The rotary cleaning brush, which is used to sweep hard surfaces clean, is one metre wide and can be oriented to the left or right. The height of the accessory can be adjusted to compensate for brush wear.
|
 |
|
|
|
Vacuum system for border, drains and natural stones
The vacuum frame can be fitted with various types of suction cup for picking up and moving different kinds of blocks (concrete, natural stone, smooth blocks and so on). The frame has two fixed guide arms.
Vacumm pomp 100 m3 and lifting 450 kg
|
|
|
 |
|
Hydraulque clamp for borders and grastiles.
Currently there are two versions of the clamp, both specially developed for paving contractors: the edging block clamp and the grass-block clamp. Both use the same basic component with a hydraulic pump.
Up to 5 titles in one movement
|
|
|
 |
|
Hydraulique clamp for machine paving.
ROLLMOPS working on polish construction side in Rawicz.
In the last years we presented our machines and layed about 100.000 m2 all over Poland to the greatest satisfaction of Our Customers.
Well trained operators are able to lay 800-1000 m2 per day.
|
 |
|
 |
|
TECHNICAL DATA
|
|
|
A. TOTAL WIDTH
|
1145 mm
|
B. TOTAL LENGTH WITHOUT ACCESSORY
|
1790 mm
|
C. WIDTH OF REAR EDGE
|
810 mm
|
D. HEIGHT OF ROLLING BRACKET
|
2080 mm
|
E. SEAT HEIGHT
|
925 mm
|
F. WHEELBASE
|
850 mm
|
G. CLEARANCE ABOVE GROUND SURFACE
|
150 mm
|
FUEL TANK CAPACITY
|
19 l
|
HYDRAULIC TANK CAPACITY
|
24 l
|
TYPE OF DIESEL ENGINE
|
Kubota D1105
|
ENGINE CAPACITY
|
26 pk
|
NUMBER OF CYLINDERS
|
3
|
DRIVE HYDRAULICS
|
double plunger pump
|
WHEEL DRIVE
|
orbit motor
|
WORKING HYDRAULICS FLOW RATE
|
12 l
|
WEIGHT READY TO DRIVE WITHOUT ACCESSORY
|
695 kg
|
LIFTING CAPACITY (0.5 m in front of wheel / with counterweight)
|
480 / 590 kg
|
TOP SPEED (continuous)
|
16 km/h
|
|
|
|
|
